High Quality Disposable Respiration Product with CE&ISO Certification (MT58028101)

High Quality Disposable Respiration Product with CE&ISO Certification (MT58028101)

Specifications
1.Made from clear non-toxic ABS and PVC
2.Nebulizer at angles up to 45 to accommodate special
3.Treatment requirements.
4.Nebulizer with mouth piece
5.Atomization rate 0.3 ml/min. Drive flow 4 to 8 LPM
6.Atomization particles<5μ

Instructionfor use:
1.Place the prescribed medication into the nebulizer jar.
2.Carefully snap the lid over the jar.
3.Connect one end of the supply tubing to the small stem at the bottom of the nebulizer.
4.Attach the nebulizer to the mask inlet or Tee-piece & Mouth piece.
5.Connect the remaining end of the supply tubing to the desired pressure source.
6.Set oxygen flow to 5-6LPM and check for flow through the device

Caution:
1.For single patient use only.
2.Not intended for reprocessing.
3.Avoid freezing and excessive heat.
4.Be sure all connections are secure