What is medical coverall?

[Product name] medical coverall

[Product structure] 100% polypropylene. The medical coverall is composed of a hooded jacket and trousers, and has a one-piece structure.

[Specifications and models] M, L, XL, XXL (non-sterile).

Table 1 One-piece size specifications (unit: cm)

[Scope of application] Suitable for paint workers/chemical plants/construction sites/housekeeping services/sanitation workers/livestock breeding/flower and tree breeding, etc.

[Product Quantity] 1 set/package

【Product performance】

1. Appearance:

1.1 The medical coverall should be dry, clean, free of mildew, and no defects such as adhesion, cracks, holes, etc. on the surface.

1.2 The connecting parts of the medical coverall can be processed by stitching, bonding or heat sealing. The eye of the needle seam should be sealed, and the stitch length should be 8 to 14 stitches every 3 cm. The stitches should be even and straight, and there should be no skipped stitches. The processed parts such as bonding or heat sealing should be flat, sealed and free of bubbles.

1.3 The zipper of the medical coverall with zipper should not be exposed, and the slider should be self-locking.

2. Structure

2.1 The medical coverall is composed of a hooded jacket and trousers, with a one-piece structure.

2.2 The structure of medical coverall should be reasonable, easy to put on and take off, and the joints should be tight.

2.3 The cuffs and ankles are elastically closed, and the face and waist of the hat are elastically closed, drawstring or buckle.

3. The size and specifications of medical coverall: M, L, XL, XXL, detailed parameters are shown in Table 1

4. Liquid barrier function

4.1 Water impermeability: The hydrostatic pressure of key parts of the medical coverall should not be less than 1.67 kPa (17 cm H2O).

4.2 Moisture permeability: The moisture permeability of medical coverall materials should not be less than 2 500 g/(m2.d).

4.3 Resistance to penetration of synthetic blood: The penetration resistance of medical coverall to synthetic blood should not be less than 1.75kPa.

4.4 Surface moisture resistance: the water level of the outer side of the medical coverall should not be lower than the level 3 requirements.

5. Breaking strength: The breaking strength of the key parts of the medical coverall should not be less than 45 N.

6. Elongation at break: The elongation at break of the key parts of the medical coverall should not be less than 15%.

7. Filtration efficiency: The filtration efficiency of non-oily particles in the key parts of the medical coverall and the joints should not be less than 70%.

8. Antistatic property: The electric charge of medical coverall should not exceed 0.6μC/piece.

9. Static electricity attenuation performance: The static electricity attenuation time of medical coverall materials does not exceed 0.5S.

10. Microbiological indicators: The total number of bacterial colonies should be ≤200CFU/g, and coliforms, Pseudomonas aeruginosa, Staphylococcus aureus, and hemolytic streptococcus should not be detected; fungi should be ≤100CFU/g.

【Instructions】

1. Before use, please choose medical coverall of appropriate specifications. 

2. Pull the zipper of the medical coverall to the bottom of the clothing. The sequence of putting on the suit is: legs-arms-head. After putting on the sleeves in turn, pull the zipper to the lower jaw. 

3. Ensure that the protective clothing is worn in a standard manner, and the head, wrists, and ankles are covered tightly to obtain the best protective effect.

【Precautions】

1. Non-sterile products must be sterilized according to medical needs before use. 

2. This product is a one-time use product, it is strictly forbidden to reuse it, and it should be disposed of according to the requirements of hospitals and environmental protection departments after use.

3. Please check if the packaging is intact before use, the packaging is damaged, please do not use. Confirm the external packaging mark, production date, and expiry date, and use it within the expiry date.

4. Before taking off the protective gloves, try to avoid touching the outer surface of the protective clothing. After taking off the gloves, try to touch the inner surface of the medical coverall. After the medical coverall is taken off, the inner surface should face outward, and the outer surface and contaminants should be wrapped inside. , To prevent pollutants from contacting human body and the environment. The protective equipment taken off should be treated in a centralized manner to avoid expanding pollution in the process.

5. This product has no flame retardancy.

[Contraindications] Use with caution if you are allergic to non-woven fabrics.

[Storage and transportation] Store in a dry, ventilated, non-corrosive gas environment, away from fire and flammable materials.

[Production date] See packaging.

[Use period] 5 years from production